Q-2, r. 46.1 - Regulation respecting a cap-and-trade system for greenhouse gas emission allowances

Full text
70.13. (Replaced).
O.C. 1184-2012, s. 45; O.C. 1125-2017, s. 43; O.C. 824-2021, s. 4.
70.13. Every promoter must also, for each project, record the following information annually in a register:
(1)  the information referred to in the first paragraph of section 70.14;
(2)  any information concerning the geographic boundaries of the project and any GHG source, sink or reservoir concerned by the project;
(3)  a calculation of emissions under the baseline scenario for the project, emissions during project implementation and emission reductions, along with the related documentation;
(4)  the quantity and type of fuels used and any data measured, sampled or used to calculate emissions under the baseline scenario for the project, emissions during project implementation and emission reductions, for each emission source, and the type of process and equipment used;
(5)  where applicable, the point of origin and chain of traceability of the documents required by the protocol applicable to the project;
(6)  information concerning any chemical analysis conducted, any results, and any documentation relating to the testing of any equipment and sources used to calculate emissions under the baseline scenario, emissions during project implementation and emission reductions from the project;
(7)  any data or documentation that must be recorded under the protocol applicable to the project.
O.C. 1184-2012, s. 45; O.C. 1125-2017, s. 43.
70.13. Every promoter must also, for each project, record the following information annually in a register:
(1)  the information referred to in the second paragraph of section 70.14;
(2)  any information concerning the geographic boundaries of the project and any GHG source, sink or reservoir concerned by the project;
(3)  a calculation of emissions under the baseline scenario for the project, emissions during project implementation and emission reductions, along with the related documentation;
(4)  the quantity and type of fuels used and any data measured, sampled or used to calculate emissions under the baseline scenario for the project, emissions during project implementation and emission reductions, for each emission source, and the type of process and equipment used;
(5)  where applicable, the point of origin and chain of traceability of the documents required by the protocol applicable to the project;
(6)  information concerning any chemical analysis conducted, any results, and any documentation relating to the testing of any equipment and sources used to calculate emissions under the baseline scenario, emissions during project implementation and emission reductions from the project;
(7)  any data or documentation that must be recorded under the protocol applicable to the project.
O.C. 1184-2012, s. 45.